Char-Lynn J Series Low Speed, High Torque Motor

Char-Lynn J Series motors provide a lot of power from a very small package. Up to 5 kW [6 1/2 HP] of power. These motors are 61 mm [2.4 in] in diameter and 104 to 130 mm [4.1 to 5.1 in] in length. The J Series motor shaft and seal allows high case pressure up to 76 bar [1100 PSI] return line pressure without case drain line. When a case drain line is used a 220 bar [3190 PSI] peak pressure is allowed in the return line.

Features

Constant clearance Geroler set
Integrated check valves
Self-lubricating shaft bushing
High-strength rigid components
Increased valve seal lands
High pressure seals
Variety of displacements, shafts, mounts and special options

Technical Catalog

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specifications

Brand

Danfoss

CC Min Displacement

8.20

CC Max Displacement

50.00

CID Min Displacement

0.50

CID Max Displacement

3.00

Min Cont PSI

1400

Max Peak PSI

3190

Min Cont BAR

Max Peak BAR

220

Min RPM

393

Max RPM

1992

Min Cont Torque in LBS

141

Intermittent Max Torque in LBS

743

Min Cont Torque Nm

Intermittent Max Torque Nm

Specs Data

Char-Lynn J Series Low Speed, High Torque Motor

Features

Solid Solutions in a Fluid Environment

Resources

Careers

Policies

Char-Lynn J Series Low Speed, High Torque Motor

Features

Contact us for more information about

Solid Solutions in a Fluid Environment